Novax Industries
658 Derwent Way
New Westminster, BC, Canada V3M 5P8
Phone: 866-977-4APS (1-866-977-4277)
Phone: 604-525-5644
Fax: 604-525-2739
www.novax.com
Models
- DS100
- DS3000
Figure B-6. The DS100 mounted on pedestrian signal heads
Figure B-7. The Vibrawalk2 unit for use with the DS3000 to provide a pushbutton locator tone and a vibrotactile arrow.
Figure B-8. DS3000 is the company's newest product
Additional components for DS3000: Vibrawalk, with functions of pushbutton and vibrating arrow integrated
Standard features
DS100
WALK indication
- Two or four tones standard, cuckoo and chirp (peep-peep) and two additional custom tones
Other
- Speaker unit mounts on pedestrian signal head
DS3000
WALK indication
- Two or four tones standard, Cuckoo, chirp, short beep, and long beep
- Dip switch setting to provide either concurrent sound from both ends of the crosswalk or sound which alternates from each end of the crosswalk
- Optional additional unit (VibraWalk) to provide vibrotactile indication
Other
- Typically mounted on pedestrian signal head
- Automatic volume adjustment (dynamic proportional volume compensation)
- Separate volume settings for locator tone and WALK signal
- External sound adjustment screws
- Separate circuit to drive the optional vibrating tactile feature
Optional features
- VibraWalk2 unit which provides pushbutton locator tone, actuation indicator (Button Lamp Indicator, BLI), Pushbutton information message (Pedestrian Acknowledge), and vibrotactile arrow at pushbutton
- Custom Speech messages for DS100 (up to 15 seconds) and DS3000 (up to 32 seconds)
- Sound inhibit interacts with traffic signal controller to disable audible indications as required
- Maximum walk timer for "Rest-In-WALK" intersections
- DS3000i option provides a control board which is mounted inside the pedestrian signal head, to drive VibraWalk2 unit and provide all sounds from pushbutton, or for use with optional additional beaconing speaker
Installation notes
4 wire 20 gauge
120 VAC derived from WALK and DONT WALK indicator
Comments
Optional VibraWalk unit is needed to provide pushbutton locator tone, tactile arrow and vibrotactile WALK indications, as required by Draft PROWAG.